Specification
| Brand | Antec | |
| Type | Full Tower | |
| Front Panel | Mesh with 1.2mm vent holes | |
| Tempered Glass Panel | Yes | |
| Motherboard Support | E-ATX, ATX, Micro-ATX, ITX | |
| External Features | ||
| Color(s) | Black | |
| Material | Steel + Plastic + Glass | |
| Weight | 12.55Kgs | |
| Dimensions | 522 x 230 x 522 mm (DWH) | |
| Front Ports | Power, Reset
USB 3.0 x 2, Type-C 10Gbps x 1 Headphone/Mic Combo Jack Temp. Display Switch x 1 |
|
| Expansion Slots | 8 | |
| Radiator Support | Front: 120 / 140 / 240 / 280 / 360 / 420mm
Top: 120 / 140 / 240 / 280 / 360mm Rear: 120mm |
|
| Fan Support | Front: 3 x 120mm / 3 X 140mm
Top: 3 x 120mm / 3 x 140mm Rear: 1 x 120mm Power Supply Shroud: 3 x 120mm |
|
| Pre- Installed Fans | 3 x 140 x 30mm PWM fans in front
1 x 120 x 30mm PWM fan in rear |
|
| Drive Bays | 3.5″ / 2.5″: 2 / 2
2.5″: 3 |
|
| Additional Feature | ||
| PSU | Not Included | |
| Side Panel | 4mm Tempered Glass(Both Sides) | |
| Clearance Space | ||
| Maximum CPU Cooler Height | ≤ 175mm | |
| Maximum Graphics Card Length | ≤ 400mm | |
| Maximum PSU Length | ≤ 245mm(with HDD) (Include cable)
≤ 440mm(without HDD) (Include cable) |
|
| Warranty | ||
| Warranty | No Warranty | |
Description
Antec Performance 1 FT Full Tower E-ATX Gaming Case
The Antec Performance 1 FT Full Tower E-ATX Gaming Case has a temperature display. The CPU and GPU temperatures are visible on the temperature monitor when users touch the switch button on the I/O panel. By pressing the switch button, you can change the temperature display’s display from CPU temperature to CPU temperature or turn it off altogether. For high-speed transfer, a Type-C (10 Gbps) connection is widely used. Plugs for preventing dust are included. 2-in-1 port for audio and microphone For improved PC showcase visual effects, both side panels are made of tempered glass. For aesthetic purposes, the cable management area has two cable covers. I/O cable routing using three pairs of Velcro straps Hardware and power supply cables are held together by five Velcro straps. For rear I/O cable routing, there are two Velcro straps at the back. Four 30 mm-thick pre-installed fans were used. Thunder T3 PWM Fan At the front, three Storm T3 140mm PWM fans At the back, one Storm T3 120mm PWM fan The longer and thicker fan blades on the Storm T3 Fan’s 30mm thickness effectively increase air intake. The PWM function effortlessly strikes a balance between noise reduction and cooling. The mesh front panel uses magnetic and clip-on attachments and 1.2-mm vent holes for convenient access. A mesh front panel with improved airflow delivers abundant air. The optimum GPU cooling performance is provided by a meshed PSU shroud with enough mesh at the bottom and optional fans.
Reviews
Clear filtersThere are no reviews yet.